內窺鏡在醫療領域的應用越來越廣泛，很多科室如內鏡室、外科、耳鼻喉科等等都在使用軟性內窺鏡進行檢查、手術，因此相應的內窺鏡的維護和保養也越來越重要。那你知道如何維護保養內窺鏡顯示器嗎？下面內窺鏡設備維修廠家為您講解。

Endoscopes are more and more widely used in the medical field. Many departments, such as endoscopy, surgery, otorhinolaryngology, are using soft endoscopes for inspection and surgery. Therefore, the maintenance and care of corresponding endoscopes are becoming more and more important. Do you know how to maintain the endoscope display? The endoscope equipment maintenance manufacturer will explain to you below.

1.不要經常性的開關內窺鏡顯示器的電源。一般醫用顯示器發生的故障常見于電源的開關，而經常性的開關會造成變壓器內的電壓不穩，從而損害開關。

1. Do not switch on and off the power supply of the endoscope display frequently. The common fault of medical display is the power switch, and the frequent switch will cause the voltage in the transformer to be unstable, thus damaging the switch.

2.要設置內窺鏡顯示器的屏幕保護。液晶顯示器使用壽命的長短受到背光燈管壽命長短的決定性影響，所以我們?cè)诓皇褂蔑@示器的時，要記得關掉背光燈管的的電源。

2. To set the screen saver of the endoscope display. The life of LCD is determined by the life of the backlight tube, so we should remember to turn off the power of the backlight tube when we do not use the monitor.

3.定期進行內窺鏡顯示器的DICOM灰階檢查。CRT顯像管因無法進行亮度自動調節功能，隨著長時間的使用其亮度可能會降低，這就需要進行重新的校正。而液晶顯示器如果沒有內置亮度調整功能，也需要進行定期的校正，才能保證機器的準確性。

3. Regularly check the DICOM gray scale of the endoscope display. The CRT picture tube cannot perform the brightness automatic adjustment function, and its brightness may decrease with a long time of use, which requires re correction. If the LCD does not have the built-in brightness adjustment function, regular calibration is also required to ensure the accuracy of the machine.

4.避免將內窺鏡顯示器放置在灰塵較多的地方。我們要時常用柔軟的干布清理掉CRT顯像管顯示器的灰塵。液晶顯示器雖有保護屏，但是要避免被硬物刺傷，同時我們們盡量不用手直接觸摸屏幕，如若不小心碰到，要及時的用干布將指印擦掉。

4. Avoid placing the endoscope display in a dusty place. When we need it, we often use a soft dry cloth to remove the dust from the CRT display. Although the LCD has a protective screen, we should avoid being stabbed by hard objects. At the same time, we should try not to touch the screen directly with our hands. If we accidentally touch the screen, we should timely wipe the fingerprints with a dry cloth.

5.注意內窺鏡顯示器的閱片環境要保持較柔的光，避免太亮的光或者光線直射。

5. Note that the viewing environment of the endoscope display should keep soft light and avoid too bright light or direct light.

內鏡的使用率越高，設備損壞的可能性越大。只有規范各階段操作流程，才能降低內鏡故障率，延長內鏡的使用壽命，節約維修成本，提高內窺鏡的使用質量。更多相關內容就來我們網站http://www.xiaomijiaju.com咨詢吧！

The higher the use rate of endoscopy, the greater the possibility of equipment damage. Only by standardizing the operation process at each stage can we reduce the failure rate of endoscopes, prolong the service life of endoscopes, save maintenance costs and improve the use quality of endoscopes. More relevant content will come to our website http://www.xiaomijiaju.com Consult!